Easily View Your CCTV Camera On Your Mobile Device In Minutes!

Easily View Your CCTV Camera On Your Mobile Device In Minutes!


Viewing your security camera feed from your mobile device has never been easier. With World Eye Cam’s mobile apps, you can remotely view your digital Video Recorder, Or DVR, as well as your cameras, from anywhere in the world, with a single tap. In this short tutorial, we’ll be showing you how to set up using the Peer-To-Peer, or P2P method using a QR code scanning setup. Think of it as allowing your camera’s server and your mobile device to meet up and communicate together in the cloud just be using a bar code your device can read. No port forwarding or IT specialists needed. To access the P2P or QR code screen, You must first power on your Digital video recorder (the VCR-like device that stores your cameras footage). Once the display screen is on, right-click and select “Main Menu”, then “Network”, then “P2P”. The P2P/QR code, which is the little black and white cube of information for your phone, will display. before we can continue, make sure you’ve checked “Enable” just above it for the P2P function. Then click “Apply” at the bottom of the screen to save the setting. Make sure that your DVR is connected to your internet’s modem or router With a CAT5 or Ethernet cable. Once P2P has been enabled, click the TCP/IP section on the left hand side of the screen Make sure you’re in the “Network” tab. Under “Mode”, select “DHCP”, and click “Save”. Once the DHCP has been enabled, you’ll need to reboot the system by right-clicking anywhere on the screen, selecting “Main Menu”, then “Shut Down”, then “Reboot”. Upon rebooting, navigate back to the P2P menu in the settings, right-click, select “Main Menu”, …”Network —>”P2P”. Be sure you’ve downloaded the iMaxCam mobile app onto your device. Next, we’ll be showing you how to set up your mobile device using the P2P/QR code. Open the iMaxCam app, and tap on “Camera”. Tap the menu icon on the top left hand corner to access the menu. Tap “device Manager” Once in “Device Manager”, tap the plus (+) sign button on the top right hand corner in the “Add Device” screen, select “P2P’ Tap the QR code icon to activate the QR code scanner. Scan the QR code by aligning it in the center of your screen and allowing the red line in the middle to focus on the code. Under “Username” and “Password”, Enter the login details you have set up previously with your Network Video Recorder, or NVR. Finally, press the “Start Live Preview” button and start watching a live preview of your cameras! If you have any other issues, or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you, because at World Eye Cam, it’s not just security cameras… We want YOU to feel secure.

Leave a Reply

Your email address will not be published. Required fields are marked *